Shielded/Unshielded Control Cables for Instrumentation
ZMS has many types of control cables。With low voltage PVC/XLPE insulated control cable、Instrumentation cable、Shielded galvanized steel wire control cable、flexible cable、Screened/protected control cables、3-in-1 0.6/1kV instrument cable、Three-in-one 0.6/1kV shielded instrument cable, etc.。
The characteristics of the control cable are，It can directly transfer electrical energy from the distribution points of the distribution system to various electronic devices。
ZMS control cable product introduction
Product 1 --- XLPE insulated control cable --- Voltage class 0.6/1 kV
Low-voltage insulated control cables are used to control and protect lines with AC voltage below 0.6/1kV。It is also suitable for industrial、mining、energy and transport sector。
standard: IEC 60502,BS 5308,GB 9330
conductor：Single Annealed Copper Wire
insulation：PVC，XLPE
jacket：PVC
Product 2 --- Armored Control Cable --- Voltage class 0.6/1 kV
This shielded control cable has high mechanical strength、Moisture and Corrosion Resistant Features，Can be laid in tunnels or cable trenches。
standard：IEC 60502, BS 5308, GB 9330
conductor：Single Annealed Copper Wire
insulation：PVC/XLPE
Armoured：Galvanized Steel Wire
jacket：PVC
Product 3 --- Flexible control cable --- Voltage class 0.6/1 kV
Flexible control cable is a multi-core cable。It is also suitable for lines with voltage class 0.6/1kV，Provides loop control and line protection。
standard：IEC502，IEC332-3
conductor：Soft copper/tinned copper
Insulation Materials：PVC
jacket：PVC
Power cables are used to transmit and distribute high-power electrical energy on the lines of the power system。The main voltage class of the control cables is 450/750 V，The voltage level of the power cable is usually above 0.6/1 kV。therefore，When producing power cables and control cables of the same size，Insulation and jacket thickness of control cables is thinner than that of power cables。
also，The cross-section of the control cable is usually small，The maximum value does not exceed 10 square meters。The area of the power cable can often reach 500 square meters。
Classification of Control Cables by Type of Work
Ordinary control cable、refractory、fireproof、Low smoke and low halogen、LSZH、High temperature and fire resistance、Cold Resistant Control Cable。
Use of control cables
Mainly used to transmit control signals、Measurement and other signals。Control cable is suitable for AC 50HZ，Rated voltage 450/750V，600/1000Industrial and mining enterprises of V and below，modern high-rise building、Control furnace、Signal transmission and protection measurement circuits。As a connecting line between various electrical instruments and automation instruments，It plays the role of transmitting various electrical signals，Ensuring safe and reliable system operation。
